- A+
Introduction
Brother printers are great devices that provide excellent quality printing. However, over time, the ink in the printer starts to dwindle and needs to be refilled. Sometimes, even after refilling or replacing the ink cartridge, the printer might show low ink levels. This is when you need to reset the ink cartridge to get the Brother printer working again. In this guide, we will explain how to reset the ink cartridge on a Brother printer.
Step 1: Determine the type of ink cartridge
The first step is to determine the type of ink cartridge you are using on your Brother printer. There are two types of ink cartridges: those with an integrated head and those without an integrated head. If your cartridge has an integrated head, it cannot be reset. In this case, you will have to replace the cartridge. If your cartridge does not have an integrated head, it can be reset.
Step 2: Remove the ink cartridge
Next, you need to remove the ink cartridge from your Brother printer. Make sure to turn off your printer before you start this process. Open the printer cover and locate the ink cartridges. Gently push down on the cartridge to release it from its holder. Then, pull the ink cartridge out of the printer.
Step 3: Reset the ink cartridge
After removing the ink cartridge, you will see a small reset button on the cartridge. Press and hold this button for a few seconds (usually 5-10 seconds) until you see the ink level on the printer reset. Once the ink level is reset, you can release the button.
Step 4: Reinstall the ink cartridge
Now you need to reinstall the ink cartridge back into your Brother printer. Gently slide the ink cartridge back into its slot and push it up until it snaps into place. Close the printer cover and turn your printer back on.
Step 5: Conduct a test print
Lastly, it is important to conduct a test print to ensure that the ink cartridge reset was successful. Select a document or photo and try printing it. If the ink cartridge reset was successful, the printer should print without any problems.
Conclusion
Resetting the ink cartridge on a Brother printer is a simple process that can save you money in the long run. By following the steps above, you can easily reset your ink cartridge and continue printing without any issues. Remember to follow these steps every time your printer shows low ink levels, and you will never have to worry about running out of ink again!
