- A+
Canon ink cartridge reset 3180 700 words
一、废墨清零3180的步骤
I. Steps to Reset Canon 3180 Ink Cartridge
1、打开废墨盒子：先把废墨盒子取出，打开废墨盒子的罩子，其中有一个可以拆卸的钮扣，把它拆下来，然后可以看到废墨盒子内部的一块电路板。
1. Open the ink cartridge: First, take out the ink cartridge, open the cover of the ink cartridge box, there is a detachable button, remove it, then you can see a circuit board inside the ink cartridge box.
2、确定位置：在电路板上有一个叫做DIP的按钮，这个按钮可以拆卸，拆卸以后可以看到4个插槽，其中有一个插槽上有一个圆形原型，这就是你要操作的部位。
2. Determine the position: There is a button called DIP on the circuit board, which can be removed. After removal, 4 slots can be seen. One of the slots has a circular prototype. This is the part you need to operate.
3、触碰电极：然后拿一颗细针，把它放到电路板上的电极位置，一般是8、9、10、11号位置，把它仔细的触碰一下，会有一些冒烟的现象，这个冒烟的现象就是废墨盒子被清零了。
3. Touch the electrode: Then take a thin needle, put it on the electrode position of the circuit board, usually 8, 9, 10, 11 positions, carefully touch it, there will be some smoke, this smoke is the ink cartridge reset.
4、安装好废墨盒：最后把废墨盒安装好，然后就可以正常使用了。
4. Install the ink cartridge: Finally, install the ink cartridge, and then it can be used normally.
二、特别提醒
II. Special Reminder
在完成废墨清零3180的步骤的时候，我们还要特别提醒大家在处理废墨盒的电路板的时候，要注意电极的位置，不要将细针放在错误的位置上，否则会引起错误，甚至损坏废墨盒子。
When finishing the steps of resetting Canon 3180 ink cartridge, we also remind everyone to pay attention to the position of the electrode when handling the circuit board of the ink cartridge, do not put the needle in the wrong position, otherwise it will cause errors and even damage the ink cartridge.
