兄弟打印机hl3150换墨清零(Brother HL3150 Printer Zeroing Ink Replacement Counter)

Brother HL3150 Printer Zeroing Ink Replacement Counter

Brother HL3150 printer users often find themselves in a predicament where the printer would stop working or show a "Replace Toner" or "Replace Drum" message even though the cartridge or drum unit is relatively new. This is because the printer has a built-in mechanism that counts the number of pages printed and prompts the user to replace the toner or drum unit after a certain number of prints. The good news is that this mechanism can be reset or zeroed through easy steps to get the printer working again.

Method One: Using the Printer's Control Panel

Step 1: Make sure the printer is turned on and the cover is closed.

Step 2: Press and hold the "Go" button until all the lights on the printer's control panel come on. This usually takes about 4 seconds.

Step 3: Release the "Go" button and close the front cover.

Step 4: The Toner, Drum, and Error lights will flash simultaneously before the Ready light goes off. Press the "Go" button six times in quick succession. The Drum and Error lights will turn on.

Step 5: Press the "Go" button nine times. The Toner, Drum, and Error lights will turn off, and the Ready light will come on.

Congratulations! The drum counter of your Brother HL3150 printer has been reset, and the printer should start working again.

Method Two: Using the Printer's Web-Based Interface

Step 1: Open your web browser and enter your Brother printer's IP address in the address bar. The IP address can usually be found on the printer's control panel.

Step 2: Enter your printer's login information. The username and password would be the same as those used to access the printer's control panel.

Step 3: Click the "System" tab, and then click the "Reset" link.

Step 4: Select "Drum" from the drop-down menu and click "OK".

Step 5: Close the web browser and turn off the printer for at least five seconds to allow the settings to take effect.

Congratulations! You have successfully reset the drum counter of your Brother HL3150 printer.

Conclusion

These two methods are the most common ways to reset the drum counter of a Brother HL3150 printer. It's important to reset the counter after installing new toner or drum units to maintain the printer's proper functioning and avoid unnecessary replacements. However, it's important to note that resetting the counter doesn't mean your drum units or toners will last forever. It's still best to replace them when they are running low or producing low-quality prints to ensure the printer's longevity and functionality.